Sunday, 1 February 2026

A New Make For February

Towards the end of January and moving into February, it was time to come up with another sewing project to work on for the month. I'd had a scrappy project in mind for a while, to try to use up lots of leftover offcuts from the denim material I'd used to make LB's pouffe. It was an idea that I got from a video on YouTube and involved stitching all the small pieces onto a piece of fabric using a zigzag stitch.

The aim of this project was to use the created fabric to repair a cover that we use on OH's favourite chair in the kitchen, the one I re-upholstered during Lockdown.




The cover in the above photo has been used on this chair for years now to protect it, but the underside of it is made of silk, I think, and it is slowly perishing with wear. As a consequence, I thought I would cover it, using the denim scraps, to keep it in use a bit longer, as this would be more hard wearing.


I started by finding a piece of fabric, in this case the lining from some curtains I took apart, to stitch the denim scraps to and then cut it to the right size. I then proceeded to stitch each small piece of denim onto it, each one overlapping the one before, using a wide zig zag stitch on my machine to minimise fraying. 

It took a couple of hours to get a few rows done, as it's quite fiddly trimming off the bits of thread, but by the end of my first session, I was probably a quarter of the way done which was quite satisfying. Here's a picture:



It's not perfect, as theres a bit of fraying and overstitching here and there, but it's fine, as it will probably be the underside of the cover in any case. 

I continued to work on this project over the next week or so, adding a few rows every few days or whenever I felt like it. It's now half way done and here's a picture. 


I'm liking the overall effect. It's interesting what you can do with even the smallest pieces of scrap fabric.

It is a great project for this month, to use up not only scraps, but thread too. I'll post again when I've  completed the project.





No comments:

Post a Comment